38 MM Fine Feed Radial Drill Machine
With the help of our professionals, we have been able to manufacture & supply 38 MM Fine Feed Radial Drill Machine. This machine provides 8 Speeds by accurate balanced pairs of cone pulleys, which runs on two ball bearings. This 38 MM Fine Feed Radial Drill Machine is featured with strongly ribbed and thick walled base plate having built-in coolant tank. Customers can avail this machine on numerous specifications as per their requirements.
Features:
- Consume less power
- Tapper Roller facility for better sliding of drill head on arm guide
- Low noise operation
- High output results
Technical Details:
| Capacity: | |
| Capacity | 38mm |
| Drilling Capacity in Solid: | |
| In Steel having 500 Mpa Tensile Strengh | 38mm |
| In Cast Iron having 180BHN | 40mm |
| Tapping Capacity: | |
| Tapping Capacity | 30mm |
| Drilling in Head: | |
| Taper in Spindle – [Nose] | MT – 4 |
| Spindle travels | 250mm |
| No. of Spindle Speeds/Range | 8/50 – 1750 RPM |
| No. of Auto Feeds | Hand Feed(Fine Feed) |
| Electrical: | |
| Power Supply | 415V, 3 PHASE, 50Hz |
| Drilling Head Two Speed Motor | 2HP |
| Arm Elevating Motor | 0.5HP |
| Working Range: | |
| Max Drilling Radius | 1050mm |
| Max Distance between Base Plate to Spindle [Spindle Retracted] | 250/950mm |
| Max Drilling Head Traverse | 640mm |
| Vertical Traverse of Arm [Auto] | 750mm |
| Rotation of Arm [Both Side] | 0-180 Deg. |
| Base Plate: | |
| Working surface: L x W | 820 X 660 |
| Weight of machine with electrical & standard accessories(approx) Net/Cross | 850/1300kg |
| No. of T – Slots & Nominal size | 4/16 |
| V-belt section of Arm Elevater Motor | A-25-A-24 |
| Box Table Size: L x H x W: | |
| Box Table Size | 400 X 300 X 300 |
| Wooden Box Packing Dimension | |
| Wooden Box packing Dimension | 1300 x 820 x 2000 |