Cookie Img

65 MM Semi All Geared Radial Drill Machine

65 MM Semi All Geared Radial Drill Machine
65 MM Semi All Geared Radial Drill Machine
Product Code : 65 MM RADIAL DRILL
Product Description

Salient Features of the machine are as under :

  • Heavy Duty approximately 65mm drilling in steel.
  • 4 auto feeds and 16 Spindle speeds for tapping, drilling, reaming processes.
  • This machine may be skilled of milling, tapping, drilling, counter-boring, honing, reaming, and boring, spot-facing, and other similar utilities.
  • Speeds can be effortlessly altered.
  • Thread tapping processes can be finished in either revolution and functioning deepness can be measured employing an optimistic stop gauge.
  • Double Column Construction for severity and easy centering.
  • Generously relational & well sufficiently ribbed base column, arm, plates, for supreme firmness and least deflection.
  • The high excellence of this mechanism and its comfort of procedure manufactured it appropriate for use by scholars, home hobbyists, and amateurs' as well as expert technicians.
  • Tapper Roller facility for improved descending of drill head on arm controller.
  • Toughened and ground machineries for lowest wear and tear.
  • All machineries are manufactured of nitride hardened, alloy steel, and lapped successively in oil bath snugged with splined shafts.
  • Precision toughened and ground spindle.
  • Arm and drill-head guiding customs are exactly hand scraped for tiniest play and rigid fastening of drill-head along with the arm.
  • Machine confirmed according to ISO: 2199-1982 Standards

Technical Details:

Capacity:
Capacity 65mm
Drilling Capacity in Solid:
In Steel having 600 Mpa Tensile Strength 65mm
In Cast Iron having 180BHN 160mm
Tapping Capacity:
Metric Threads up to size [MM] 48 X 3
Any Other Threads [Inch] 1 3/4 Fine Pitch
Boring in Steel:
Boring in Steel 140mm
Taper in Spindle - [Nose] MT - 5
Spindle travels - [Auto/Manual] 325mm
Spindle Diameter at Front Bearing 78mm
RAM Diameter 110mm
No. of Spindle Speeds/Range 8/35 - 1230 RPM
No. of Auto Feeds 4/0.10 - 0.25
Working Range:
Max Drilling Radius 550/1600
Max Distance between Base Plate to Spindle [Spindle Retracted] 395/1420


Max Drilling Head Traverse 1100MM
Column Sleeve Diameter 360mm
Vertical Traverse of Arm [Auto] 725mm
Rotation of Arm [Both Side] 0-180 Deg.
Height 3100mm
Rapid Feeds:
Travel of Rail – [Vertical] 725mm
Travel of Drilling Head – [Horizontal] 1100mm Manual
Electrical:
Power Supply 415V, 3 PHASE, 50Hz
Drilling Head Two Speed Motor 6HP
Arm Elevating Motor 2HP
Coolant Pump -
Base Plate:
Working surface: L x W 1450 x 900
Overall size 2150 x 970 x 210[R x S x Q]
No. of T – Slots & Nominal size 4/22
Weight with Electricals & Standard Accessories-APPROX Net/Cross 4000Kg
Space Required by Machine: L x W x H:
Space Required 2600 x 2200 x 2750
Box Table Size 600 x 500 x 500
Colors:
Colors MAAN GREEN - SPECIAL


Salient Features of the machine are as under :

  • Heavy Duty approximately 65mm drilling in steel.
  • 4 auto feeds and 16 Spindle speeds for tapping, drilling, reaming processes.
  • This machine may be skilled of milling, tapping, drilling, counter-boring, honing, reaming, and boring, spot-facing, and other similar utilities.
  • Speeds can be effortlessly altered.
  • Thread tapping processes can be finished in either revolution and functioning deepness can be measured employing an optimistic stop gauge.
  • Double Column Construction for severity and easy centering.
  • Generously relational & well sufficiently ribbed base column, arm, plates, for supreme firmness and least deflection.
  • The high excellence of this mechanism and its comfort of procedure manufactured it appropriate for use by scholars, home hobbyists, and amateurs' as well as expert technicians.
  • Tapper Roller facility for improved descending of drill head on arm controller.
  • Toughened and ground machineries for lowest wear and tear.
  • All machineries are manufactured of nitride hardened, alloy steel, and lapped successively in oil bath snugged with splined shafts.
  • Precision toughened and ground spindle.
  • Arm and drill-head guiding customs are exactly hand scraped for tiniest play and rigid fastening of drill-head along with the arm.
  • Machine confirmed according to ISO: 2199-1982 Standards

Technical Details:

Capacity:
Capacity 65mm
Drilling Capacity in Solid:
In Steel having 600 Mpa Tensile Strength 65mm
In Cast Iron having 180BHN 160mm
Tapping Capacity:
Metric Threads up to size [MM] 48 X 3
Any Other Threads [Inch] 1 3/4 Fine Pitch
Boring in Steel:
Boring in Steel 140mm
Taper in Spindle - [Nose] MT - 5
Spindle travels - [Auto/Manual] 325mm
Spindle Diameter at Front Bearing 78mm
RAM Diameter 110mm
No. of Spindle Speeds/Range 8/35 - 1230 RPM
No. of Auto Feeds 4/0.10 - 0.25
Working Range:
Max Drilling Radius 550/1600
Max Distance between Base Plate to Spindle [Spindle Retracted] 395/1420


Max Drilling Head Traverse 1100MM
Column Sleeve Diameter 360mm
Vertical Traverse of Arm [Auto] 725mm
Rotation of Arm [Both Side] 0-180 Deg.
Height 3100mm
Rapid Feeds:
Travel of Rail – [Vertical] 725mm
Travel of Drilling Head – [Horizontal] 1100mm Manual
Electrical:
Power Supply 415V, 3 PHASE, 50Hz
Drilling Head Two Speed Motor 6HP
Arm Elevating Motor 2HP
Coolant Pump -
Base Plate:
Working surface: L x W 1450 x 900
Overall size 2150 x 970 x 210[R x S x Q]
No. of T – Slots & Nominal size 4/22
Weight with Electricals & Standard Accessories-APPROX Net/Cross 4000Kg
Space Required by Machine: L x W x H:
Space Required 2600 x 2200 x 2750
Box Table Size 600 x 500 x 500
Colors:
Colors MAAN GREEN - SPECIAL


Contact Us

K-1/4, Chitra Industrial Estate, G.I.D.C., Bhavnagar, Gujarat, 364004, India
Phone :+917042360402